Checking Network Settings Of This Machine; Checklist - Konica Minolta bizhub C754 Quick Start Manual

3

Checking network settings of this machine

Tap [Utility], and select [Device Information]. Then, check that the IP address is displayed.
• For IPv4 environment
If no IP address is displayed, you need to configure the network.
- Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the
required settings to suit your environment. For details, refer to the User's Guide DVD.
- For information on the default administrator password, refer to the [Quick Assist Guide].
d
Reference
In general, the default settings are available for network connection; however, some network environments
require a change on network settings. For details, refer to the User's Guide DVD.

Checklist

While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Name
Host Address
File Path
User ID
Password
3-14
Entry column
Host name or IP address to which the scanned data is sent
Name of the dedicated folder to receive the scanned data
User name required to log in to the computer
Password required to log in to the computer
• You should not enter this column for security reasons.
Scan-to-Send function
• For IPv6 environment
3.2
Detail
page 3-15
page 3-15
page 3-15
Contact your sys-
tem administra-
tor.
bizhub C754/C654