NEC NC2041L User Manual page 69

6-2-8. STATUS indicator
SYSTEM status indicator
Indicator condition
Off
Blinking light Orange
Green (cycle of 1
second)
(Note 1)
Green (cycle of 2
second)
(Note 2)
Red
(With buzzer)
Red
(Without buzzer)
Steady light Green
Orange
Red
(Note 1) Repeats 0.5 seconds on → 0.5 seconds off.
(Note 2) Repeats 1.5 seconds on → 0.5 seconds off.
LIGHT status indicator
Indicator condition
Off
Steady light
LIGHT status indicator
Projector condition
Main power is off.
State from turning the power off to entering standby mode.
The projector is getting ready to turn on.
The douser is closed.
The projector is turned on with light off.
Safety problem, error.
Error with possible image project under certain conditions.
The projector is turned on.
The projector is in standby.
Error at a level with not affect on projection.
Projector condition
The light source is off.
The light source is on.
6. Appendix
SYSTEM status indicator
Note
-
Wait for a moment.
Wait for a moment.
-
An error message is displayed in
the LCD screen.
Check the content of the error.
An error message is displayed in
the LCD screen.
Check the content of the error.
-
-
An error message is displayed in
the LCD screen.
Check the content of the error.
Note
-
-
69