Table of Contents
Advertisement
3. Projection of Images (Basic Operation)
3
Turn on the light power switch ([1]) then the projector power switch ([2]) on the side of the
projector.
A buzzer sounds and the software begins to start. While the software is starting, the POWER indicator is changed from
lighting in blue to blinking in blue. After software startup is complete, the projector goes to a standby state. While the
projector is in a standby state, the POWER, STATUS, SYSTEM status indicators light in orange. KEY LOCK becomes
automatically on if no control panel operation takes place in the standby state for 30 seconds by default. Buttons on the
control panel do not function while KEY LOCK is on. (See page 40)
Administrator switch
Lightr power switch
Projector power switch
33
Advertisement
Table of Contents
