Table of Contents
Advertisement
1. What's in the Box? and the Names of the Projector Parts
1-3-5. Control panel
1. Light button
Toggles ON and OFF the light on the control panel of the projector and the backlight on the LCD screen.
2. DOUSER indicator
Displays the douser open/close state. (See page 67)
3. TEMP. indicator
Displays the status of the temperature inside the projector. It blinks or lights up when the temperature inside the projector rises
close to the operating temperature limit or exceeds the operating temperature. (See page 68)
4. LIGHT indicator
Displays the status of the light source. The indicators turn on when the light source is on and turn off when the light source is
off. (See page 68)
5. STATUS indicator
Indicates the status of the projector. When the projector is operating normally, these light/blink in green or orange.
When an error occurs, they light/blink in red. When an error occurs, check the contents of the display on the LCD screen. (See
page 68)
6. POWER indicator
Displays the status that the projector software is starting after the projector power switch and light power switch has been turned
ON (see page 68).
7. LCD screen
The LCD screen displays menus and setting values for the projector operations.
8. UP/DOWN/LEFT/RIGHT buttons
Press these buttons to select a menu item while a menu is displayed.
9. MENU button
Press this button to display the menu for various settings and adjustments. (See page 49)
22
2 3 4 5 6
1
7
8
9
10
11
16
17
14
21
12
13
14
15
18
19
20
Advertisement
Table of Contents
