Table of Contents
Advertisement
NC2041L
4
5
1. Light status indicator
Displays the status of the light source. The indicators turn on when the light source is on and turn off when the light source is
off. (See page 69)
2. System status indicator
Indicates the status of the projector. When the projector is operating normally, these light/blink in green or orange.
When an error occurs, they light/blink in red. When an error occurs, check the contents of the display on the LCD screen. (See
page 69)
3. Control panel
On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of pro-
jected screen. (See page 22)
4. Administrator switch
The projector can be operated normally by inserting the administrator key horizontally and turning it to the vertical direction.
At this time, the administrator key cannot be removed. The projector will not function unless the administrator key is inserted.
5. Light power switch
While AC power is being supplied, set the projector power switch and light power switch to ON position, then your projector will
enter a standby state.
6. AC power cable
This is the cable that supplies AC power to the projector head. Contact your dealer/distributor for connecting the power cable
or AC power cable.
7. Air outlet
The air outlet to exhaust heat inside the projector. Do not cover.
1. What's in the Box? and the Names of the Projector Parts
1
2
3
10
6
11
7
8
9
12
14
13
17
Advertisement
Table of Contents
