Punch In/Punch Out - Yamaha DRX-730BL Owner's Manual

Song Recording
The data recorded on tracks for keyboard playing (R1/R2/L) can be re-recorded in
parts with the Punch In/Punch Out feature.
Before re-recording
After Re-recording
1
In the Record Ready Mode (page 88) for the track you will re-record or in the
Rehearsal Mode, use the SUB MENU [ ] and [ ] buttons so that "Punch In:Off"
appears on the display.
Use the [–] and [+] buttons, [1]–[0] number buttons, or the Data Dial to enter the
measure number for using the Punch In feature.
2
Use the SUB MENU [ ] button so that "Punch Out:Off" appears on the display.
Use the [–] and [+] buttons, [1]–[0] number buttons, or the Data Dial to enter the
measure number for using the Punch Out feature.
3
Start and Stop Recording
Start recording as usual. Even though you start playing from the beginning, only the
data played within the Punch In/Punch Out range will be re-recorded.
92

Punch In/Punch Out

1 2 3
Recording start
(Punch In)
1 2 3
Previously
played data
P u n c h I n :
P u n c h O u t :
4 5 6
Recording stop
(Punch Out)
4 5 6
Newly played data
3
5
• Punch In/Punch Out
recording is available
only when Multi
record mode is en-
gaged. When in the
7 8
Quick record-ready
mode, "Punch In: - - -"
or "Punch Out: - - -"
appears on the dis-
play and Punch In/
Punch Out recording
is not accessible.
7 8
• If you select the
Previously played
tracks set as the Ac-
data
companiment or Har-
mony, "Punch In: - - -"
or "Punch Out: - - -"
appears on the dis-
play and Punch In/
Punch Out recording
is not accessible.
• You can use Punch
In/Punch Out to re-
record multiple tracks
at the same time.
• Punch In/Punch Out
cannot be used for
songs that have no
data recorded in
them. "Punch In: - - -"
will be shown on the
display.
• The Punch Out mea-
sure number cannot
be set lower than the
Punch In measure
number.