Song Copy - Yamaha DRX-730BL Owner's Manual

3
Press the [+] (YES) Button
Make sure that the disk you wish to copy from (source disk) is inserted in the disk
drive, then press the [+] (YES) button. "Now Reading" will appear on the display.
N o w R e a d
The contents of the disk will be copied to the PSR-730/630, and when reading is
finished, "Insert Copy Disk" will be displayed.
I n s e r t C
4
Insert the Destination Disk into the Floppy Drive
Insert the destination disk for the copy operation into the disk drive. "Now
Copying" will appear on the display.
N o w C o p y
Data will be copied from the PSR-730/630 to the destination disk, and when
copying is finished, the display will return to the "Disk Copy? YES".
If the quantity of data is large, it may be necessary for the data to be copied in parts.
In such a case, "Insert Source Disk" will appear again on the display.
I n s e r t S
Eject the copy (destination) disk and insert the source disk. Follow the messages on
the display and repeat to change the disks. The number of times you repeat the disk
changes depend on the size of the data to be copied. Once all the data has been copied,
the display will return to the "Disk Copy? YES" .

Song Copy

The songs recorded on a floppy disk can be copied in file units to another location
on the same disk.
1
Insert the Floppy Disk into the Disk Drive
Insert the disk with the songs you want to copy into the disk drive.
i n g . . . n d P i Y E S
o p y D i s k d P i Y E S
i n g . . . n d P i Y E S
o u r c e D i s k
Disk Operations
P i Y E S
• While data is copying
("Now Copying" or
"Now Reading" is dis-
played), never eject
the floppy disk or turn
the power off.
• If you want to cancel
the Disk Copy func-
tion in this step, press
the [–] (NO) button to
cancel the operation,
returning to "Disk
Copy? YES" display.
• The disk type of both
source disk and desti-
nation disk must be
the same (2DD or
2HD). If the source
disk is 2HD type, use
2HD blank disk for the
destination. If you in-
sert a wrong type,
"Disk Media Type Er-
ror!!" will be shown on
the display.
• If you insert a wrong
disk, different from the
source or destination
disk, during the disk
copy operation, "Disk
Type Error!!" will be
shown on the display.
73