Rehearsal Mode - Yamaha DRX-730BL Owner's Manual

Rehearsal Mode

If the [SYNC START] button is pressed while in Record Ready Mode, it
will be canceled (the beat lamps will go out) and the PSR-730/630 will enter
Rehearsal Mode. In this mode, you can try playing your song before actually
recording it. Pressing the [SYNC START] button will return to Record
Ready Mode.
7
Select a Voice, If Necessary
If necessary, select a voice for the track to be recorded by pressing the
[VOICE] button and selecting in the normal way.
8
Record
Recording will begin as soon as you play a note on the keyboard or press the
[START/STOP] button. The BEAT indicator dots will begin to indicate the
current beat, and the MEASURE parameter will show the current measure
number during recording.
The style will repeat continuously when recording is started, so you can
continue to add ("overdub") notes until the current track is complete. The style
should be recorded based on a CM7 chord (C Major Seven) in order for it to
function properly when used for auto-accompaniment.
1 2 3 4 5 6
219 219 340 322 324 434
RHYTHM RHYTHM BASS CHORD CHORD PAD
1 2 1 2
ACCOMPANIMENT TRACK
1 2 3 4 5 6
009
MEASURE BEAT
1 2 3 4
MULTI PAD
C = chord tone
C S C C S C
C, S = scale tones
7 8 9
468 442 471
PHRASE PHRASE MELODY
1 2 1
7 8 9
START / STOP
Style Recording
SYNC STOP START
NIMENT
• The Registration Memory
buttons will be disabled in
the Style record mode.
• Before actually starting to
record you can try playing
the PSR-730/630 the way it
is set up by using the "Re-
hearsal Mode": press the
[SYNC START] button to
temporarily disengage the
record ready mode, re-
hearse as necessary, then
press the [SYNC START]
button again to return to the
record ready mode.
• If the memory becomes full
while recording, "Full" will
appear on the display and
recording will stop (the re-
hearsal mode will be en-
gaged).
• Even though you can start
recording with the user style
memory space thoroughly
consumed, "Full" will be
shown on the display and
the recording will forcibly be
stopped. In this case, first
exit from the record mode,
next select the unnecessary
user style, and then enter
the record mode again and
execute the Clear function
(see page 105) to secure the
free space to record.
101