Hawking HOW17ACMx2 User Manual page 42

802.11n Protection
DTIM Period
RTS Threshold
Fragment Threshold
Multicast Rate
Tx Power
Beacon Interval
Station idle timeout
37
Enable/disable 802.11n protection, which increases reliability
but reduces bandwidth (clients will send Request to Send (RTS)
to access point, and access point will broadcast Clear to Send
(CTS), before a packet is sent from client.)
Set the DTIM (delivery traffic indication message) period value
of the wireless radio. The default value is 1.
Set the RTS threshold of the wireless radio. The default value is
2347.
Set the fragment threshold of the wireless radio. The default
value is 2346.
Set the transfer rate for multicast packets or use the "Auto"
setting.
Set the power output of the wireless radio. You may not
require 100% output power. Setting a lower power output can
enhance security since potentially malicious/unknown users in
distant areas will not be able to access your signal.
Set the beacon interval of the wireless radio. The default value
is 100.
Set the interval for keepalive messages from the access point
to a wireless client to verify if the station is still alive/active.