Hawking HOW17ACMx2 User Manual page 17

3.
To change the access point's LAN IP address, go to "LAN-side IP Address" and you will see the screen
below.
4.
Enter the IP address settings you wish to use for your access point. You can use a dynamic (DHCP) or
static IP address, depending on your network environment. Click "Next" to save the changes and to go
to the security settings.
When you change your access point's IP address, you need to use the new IP address
to access the browser based configuration interface instead of the default IP
192.168.1.230.
12