Charging With The Supply Unit; Switching The Appliance On And Off - Philips S556 Manual

Charging
Note: This appliance can only be
used without cord.
Charge the appliance before first use
and when the display indicates that
the battery is almost empty.
Charging takes approx. 8 hours. A
fully charged shaver provides up to
30 minutes of shaving time.

Charging with the supply unit

1 Put the small plug in the shaver.
2 Put the supply unit in the wall
socket (Fig. 4).
3 After charging, remove the supply
unit from the wall socket and pull
the small plug out of the
appliance.
Charge indications
Battery low
When the battery is almost empty,
the battery charge indicator flashes
orange (Fig. 5).
Battery charging
When the appliance is charging, the
battery charge indicator flashes
white.
Battery full
When the battery is fully charged, the
battery charge indicator lights up
white continuously (Fig. 6).
Note: This appliance can only be
used without cord.
'Unplug before use' reminder
The battery charge indicator flashes
fast briefly to remind you to unplug
the shaver first.
Using the appliance
Removing or attaching the
click-on attachments
1 Make sure the appliance is
switched off.
2 Insert the lug of the attachment
into the slot in the top of the
appliance. Then press down the
attachment to attach it to the
appliance ('click') (Fig. 7).
3 Pull the attachment straight off
the appliance (Fig. 8).
Note: Do not twist the attachment
while you pull it off the appliance.
Switching the appliance on
and off
1 To switch the appliance on or off,
press the on/off button once (Fig.
9).
Note: This appliance can only be
used without cord.
Shaving
Skin adaptation period
Your first shaves may not bring you
the result you expect and your skin
may even become slightly irritated.
This is normal. Your skin and beard
need time to adapt to any new
shaving system. To allow your skin to
adapt to this new appliance, we
advise you to shave regularly (at
least 3 times a week) and exclusively
with this appliance for a period of 3
weeks.
Dry shaving
1 Switch on the appliance.
2 Move the shaving heads over
your skin in circular movements to
catch all hairs growing in different
directions (Fig. 10). Exert gentle
pressure for a close, comfortable
shave.
Note: Do not press too hard, as
this can cause skin irritation.