Charging With The Supply Unit - Philips S7882/51 Manual

English

Charging with the supply unit

Warning: Keep the USB cable and the USB
supply unit dry.
1 Make sure that the appliance is switched off.
2 Insert the small plug of the USB cable into the
socket in the bottom of the appliance.
3 Insert the USB plug into the USB supply unit
(not provided).
4 Insert the USB supply unit into the wall socket.
While the appliance is in quick charge mode,
-
the lights of the battery status indicator light
up one after the other. After approximately
5 minutes, the bottom light of the battery
status indicator flashes. The battery now
contains enough energy for one full shave.
While the appliance charges, first the
-
bottom light of the battery status indicator
flashes and then lights up continuously. Next
the second light flashes and then lights up
continuously, and so on until the appliance is
fully charged.
When the appliance is fully charged, all three
-
battery indicator lights light up continuously.
After approx. 30 minutes, the light goes out
automatically.
5 After charging, remove the USB supply unit
from the wall socket, pull the USB plug out of
the supply unit and then pull the small plug out
of the appliance.
41