Quick Charge; Charging With The Supply Unit; Using The Shaver - Philips NORELCO SP9841 Manual

14
English

Quick charge

Charging with the supply unit

Using the shaver

After approx. 5 minutes of charging the shaver
contains enough power for one shave.
1 Make sure the shaver is switched off.
2 Put the small plug in the shaver and put the
supply unit in the wall socket.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the supply unit from
the wall socket and pull the small plug out of
the shaver.
Note: When the battery is full, the display
switches off automatically after 15 minutes.
Always check the shaver and all accessories
before use. Do not use the shaver or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with
one of the original type.
This symbol indicates that the shaver can be used
in the bath or shower.
- Use this shaver for its intended household use
as described in this manual.
- For hygienic reasons, the shaver should only
be used by one person.
- Trimming is easier when the skin and hair are
dry.