Xerox Printer User Manual page 93

XFP3021E Font name <font name> exceeds 20 characters
XFP3024E Line end coordinate <= start coordinate
XFP3030E Box off (top/bottom/left/right) of physical page
XFP3034E Box width is zero
XFP3035E Box height is zero
XFP3040W Text off (top/bottom/left/right) of physical page
XFP3050W Logo off (top/bottom/left/right) of physical page
XFP4001F Unexpected end of file
HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS
Indication The font name exceeded the 20 character maximum length.
Action Use a valid font name, which should consist of 20 characters or
less.
Indication The line ending coordinate is less than or equal to the line
starting coordinate.
Action Correct the line coordinates and recompile the form.
Indication The box went off either the top, bottom, left, or right of the
physical page.
Action Correct the box coordinates so the box does not extend beyond
the physical page.
Indication The width of the box was zero.
Action Correct the box width and recompile the form.
Indication The height of the box was zero.
Action Correct the box height and recompile the form.
Indication The text went off either the top, bottom, left, or right of the
physical page.
Action Correct the text coordinates so the text does not extend beyond
the physical page.
Indication The logo went off either the top, bottom, left, or right of the
physical page.
Action Correct the logo coordinates so the logo does not extend
beyond the physical page.
Indication The END statement was encountered before any description
commands. There is nothing to compile.
Action Move the END command to the last line of the FSL and
recompile the form.
MESSAGES
6–11