Xerox Printer User Manual page 139

There should only be one blank line above each top entry
in the columns of this page.
(Remove this text and arrows.)
This layout guide specifies the appearance
of a desired index. There are several fields
below, and by editing inside them you
determine how the index will look.
(Don't delete the fields or change their
properties. Edit only their content.)
The fields will not appear in the resulting
index.
This frame will not be present in the index
created.
NOTE: The white
purposefully 11pts less high than the usual
similar frame in other 8.5×11 templates.
REQUIRES a blank first line in each column
of the first page of the finished document
for the correct white space.
A
item, 3, 5 to 7
subentry
Sig &; Bld Ex
tertiary entry
DOCNAME
DRAFT NAME
space frame is
If there is NOT a blank line at the top
of this 2nd column . . . put one in.
Examples of the three levels, three different
paragraphs. Remember that each level has that
number of tabs prior to the first character.
Notes to DELETE when finished.
You can use <SAME> on these next three
paragraphs.
Entry - Notice that this line wraps at the same point
as other levels.
Subentry - This line also wraps at the
same point as other levels.
Tertiary - Notice that this line wraps
at the same point as other levels.
Index
INDEX–1