Xerox Printer User Manual page 84

HOST FORMS DESCRIPTION LANGUAGE
XFG6005W Group name too long, using <name>
XFG6006W Member/Form name <name> is too long
XFG6007F DDname <name> is not defined
XFG6008F Dsname <name> does not exist
XFG6009F Invalid paper size specified <paper size>
XFG6010F Keymap id too long <keymap id>
XFG6011F Cannot open batch file <file name>
XFG6012F Batch files nested too deep
6–2
Indication The group name used exceeds the maximum 8 characters
allowed.
Action None required. The system truncates the identifier at 8
characters.
Indication The member or form name specified in the parm statement is
too long. The member name is only 8 characters or less, and the
form name is only 6 or less.
Action Correct the member/form name in the parm statement.
Indication The DDname is not defined in the JCL.
Action Modify the JCL to include the missing DDname.
Indication The Dsname defined by the DDname does not exist in the
system.
Action Check and modify the JCL.
Indication the paper size incountered could no be identified.
Action Make sure that the paper size value is one of the following: LT,
LG, A3, A4, or B4, and then rerun the job.
Indication The compiler parsed a keymap id that exceeded the maximum
eight characters.
Action Specify a keymap id that is eight characters or less.
Indication There is a serious system error. The compiler was not able to
open the immediate IFF file created by the compiler.
Action Verify that the file name is correct and rerun the job. If the
problem persists, contact your System Administrator.
Indication The maximum number of nested batch files is now only 4.
Action Correct the batch file such as the deepest nested level to 4 or
less.
HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS