Xerox Printer User Manual page 87

XFP1003W Character not in FDL alphabet
XFP1004W DRAW N and REPEAT EVERY disagree, using 2
XFP1005W Undefined Section Name <name>, command ignorned
XFP1006W Invalid line weight, using HAIRLINE
XFP1007W Invalid border weight, using HAIRLINE
XFP1008W Possible missing or unmatched quotes
XFP1009E 600 spi cannot be used with highlight color form
HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS
Indication A character was found in the FSL statements that does not exist
in the FSL alphabet. The character was ignored.
Action Verify that the character does not belong in the FSL statements,
then move or delete it.
Indication The number of lines entered for the DRAW command must be
greater than 1. The compiler substituted 2 for the invalid existing
number.
Action Enter the correct values and recompile the form.
Indication The section name used has not been defined.
Action Verify that the section name was spelled correctly or make sure
the section is defined prior to invoking it with the DO SECTION
command.
Indication An invalid line weight was entered. The compiler substituted a
value of HAIRLINE.
Action If HAIRLINE is not the value you want, correct the FSL and
recompile the form.
Indication An invalid border weight was entered for a box. The compiler
substituted a value of HAIRLINE.
Action If HAIRLINE is not the value you want, enter a valid border
weight.
Indication The compiler cannot detect a closing quote.
Action Make sure that all quotes in the preceding commands in your FSL
are matched.
Indication There is no Xerox printer support for highlight color in 600 spi
mode.
Action Use 300 spi for color forms or use black and white mode for 600
spi.
MESSAGES
6–5