Administration - Belkin F5D7230-4 User Manual

4.8 Administration

υ
System Clock Configuration
Network administrators may want to synchronize date and time
among network devices. This can be done by synchronizing the
local clock to an available NTP server or manually specifying the
date and time in this router for your network.
Option 1: Using an existing NTP server.
1. In Set by item, enable the Network Time Protocol option.
2. In NTP Server field, enter the IP address of the NTP server.
3. In Update Interval item, select your update interval as 1, 2 or
7 days.
4. In Time Zone field, select a time zone according your
geographic location.
Option 2: Specifying the router as your network NTP server.
1. In Set by item, enable the Manual Setup option.
2. Manually enter the date and time information in respective
fields.
υ
Management Setup
Username&Password: For administration security, specify
required User Name and Password and re-enter password in
corresponding field for confirmation. This setting limits your
Web-based manager access to users with the correct credentials.
By default, the user name is empty and the password is admin.
υ
Firmware Upgrade
This option allows you to upgrade the Wireless Broadband Router
with new firmware. After upgrading, your customized configuration
will still exist and not reset to the factory defaults. To upgrade,
download required firmware file to your host PC and follow the
steps below:
4. Web Configuration