Belkin F5D7230-4 User Manual page 34

Wireless Broadband Router User Manual
υ
Manual Conifg
If Manual Config is your option, configure these fields as required
by your ISP.
IP Address/Subnet Mask: Enter the fixed IP address and subnet
mask given by your ISP in respective fields. The default values are
0.0.0.0/0.0.0.0.
Default Gateway: The IP address of the default gateway of the
router. It is the IP that the router first contact to communicate with
the Internet. The default is 0.0.0.0.
DNS Servers: Specifies the IP address of the Domain Name
Server. Your LAN side DHCP clients use the DNS to map a
domain name to its corresponding IP address and vice versa. Up to
three DNS servers are allowed. If no DNS server is specified or the
specified servers are not available, the router will automatically
assign a DNS server to the DHCP clients.
WINS Servers: Optional for Windows Internet Names Service.
Enter the IP addresses of WINS servers if required.
Host Name & Domain Name: Optional. Allows you to supply host
and domain name for the router.
After you finish the WAN settings, click Apply to submit your
changes.
Figure 4-7 WAN Configuration-Manual Config
26