Table of Contents
Advertisement
Recall Function
This is used to restore some
functions that have already been
started after the appliance has
been switched off unintentionally.
If the appliance is switched off
unintentionally, carry out the following
procedure within 6 seconds:
1. Switch on the appliance.
• The LED above the
to flash.
2. Press the pause button
to restore the functions that were
previously active.
The Recall function only allows the
following functions to be restored:
1 Functions and power levels of the
cooking zones.
2 Timed cooking.
3 Multizone function.
4 Rapid heating.
5 Booster functions.
6 Controls lock.
Any functions that do not appear in
the list will not be restored.
58
Use
button will start
immediately
3.6 Error notifications
If the appliance malfunctions or operates
incorrectly, the associated error code
appears on the cooking zones display.
The error codes always begin with "E.." or
"Er..", followed by a number.
The following error codes can be corrected
without having to contact the Technical
Support Service.
• E2: Switch off the appliance and allow it
to cool down.
• E3: Make sure that the pans are suitable
for induction cooking and that they are
not empty.
If these error codes appear
frequently or codes other than the
ones shown in the list appear,
contact Technical Support.
• The
icon, accompanied by an
acoustic signal, indicates that a
command has been activated for a long
time. Switch the appliance off and on
again to remove the error message.
Advertisement
Table of Contents
