Table of Contents
Advertisement
to stop the buzzer.
Modifying or deactivating timed cooking
1. Select a timed zone.
2. Press the zone selection button again to
display the remaining time.
3. Use the
and
reset the countdown. Resetting the
countdown disables the timed cooking.
Controls lock
This function allows the buttons of the control
panel to be locked. This function can be
activated either when the unit is switched on or
off.
To activate the controls lock when the appliance
is switched on:
1. Press the
button for at least 1 second.
2. When the controls lock indicator light is
switched on, the controls are locked (except
for the
and
To deactivate the controls lock, press the
button for at least 1 second and check that the
indicator light above is off.
A power failure will not deactivate the
controls lock.
Safety features
See General safety instructions.
Limiting the cooking duration
The appliance has an automatic device that
limits the duration of use.
If the cooking settings for a pan are not
changed, the maximum operation time for each
zone depends on the power level selected.
CLEANING AND MAINTENANCE
Cleaning the glass ceramic hob
See General safety instructions.
Cleaning the surfaces
To keep the surfaces in good condition, they
should be cleaned regularly after use. Let them
cool first.
91477B180/A
buttons to modify or
buttons).
Heating is switched off when the device for
limiting the duration of use is activated.
Power level
Maximum cooking time
1 - 8
9
Booster (P)
Residual heat indicators
When the cooking zones are switched off, if
they have a temperature above a certain safety
threshold, the
symbol will appear on the
display. When the temperature falls below this
threshold, the
symbol disappears.
Protection from overheating
If the hob is used on full power for a long
period, the electronics will have trouble cooling
down if the room temperature is high.
When certain safety thresholds are reached, on
or more cooking zones are deactivated. At the
end, if the internal temperature is very high, the
appliance is switched off automatically.
Error notifications
If the appliance malfunctions or operates
incorrectly, the code associated with the error
appears on the displays of the cooking zones.
Errors associated with overheating of the
appliance or one of its parts can only be solved
by allowing it to cool down and are coded as
"C", "c" and "Fc".
Residual heat indicators are not to be
considered as error codes.
If these errors persist or different errors appear,
note down the code and contact Technical
Support.
Ordinary daily cleaning
Always and only use specific products that do
not contain abrasives or chlorine-based acids.
Pour the product onto a damp cloth and wipe
the surface, rinse thoroughly and dry with a soft
CLEANING AND MAINTENANCE - 29
10 hours
3 hours
10 minutes
Advertisement
Table of Contents
