Additional Functions; Error Notifications - Smeg SI2741D Manual

can be used to bring a large amount of water to
the boil rapidly.
After selecting a zone:
1. Set the power level to 9.
2. Press the button again; the
The Booster function remains active for
a maximum of 10 minutes, after which
the power level of the zone returns to 9.
will be shown on the display.
To deactivate the Booster function, simply
decrease the power level of the cooking zone
or switch off the appliance.

Additional functions

Timed cooking
This function is used to program the automatic
switch-off of each cooking zone at the end of a
period of time set by the user (from 1 to 99
minutes).
To set a timed cooking:
1. Select any cooking zone using the specific
buttons.
2. Select a power level (from 1 to 9).
The timer cannot be activated if the
power level of the selected zone is zero
(0).
3. Press the select cooking zone button again;
a beep will be emitted to confirm.
The symbol will appear on the display of
the selected zone, while
the displays of the adjacent zones.
If one of the front zones has been
selected, the digits of the countdown
will appear on the displays of the rear
zones and vice versa.
4. Use the and
minutes (pressing continuously allows you to
advance quickly).
5. Press any select cooking zone button or wait
10 seconds to start the timer.
The display of the timed zone now shows the
previously set power level with a dot at the
lower right (e.g.: ).
At the end of the timed cooking, the cooking
zone is switched off, the display shows
91477A906/C
symbol
will appear on
buttons to select the
flashing and beeps are emitted. Press any button
to stop the buzzer.
Modifying or deactivating timed cooking
1. Select a timed zone.
2. Press the zone selection button again to
display the remaining time.
3. Use the and
reset the countdown. Resetting the
countdown disables the timed cooking.
Controls lock
This function allows the buttons of the control
panel to be locked. This function can be
activated either when the unit is switched on or
off.
To activate the controls lock when the appliance
is switched on:
1. Press the button for at least 1 second.
2. When the controls lock indicator light is
switched on, the controls are locked (except
for the and
To deactivate the controls lock, press the
button for at least 1 second and check that the
indicator light above is off.
A power failure will not deactivate the
controls lock.

Error notifications

If the appliance malfunctions or operates
incorrectly, the code associated with the error
appears on the displays of the cooking zones.
Errors associated with overheating of the
appliance or one of its parts can only be solved
by allowing it to cool down and are coded as
"C", "c" and "Fc".
Residual heat indicators are not to be
considered as error codes.
If these errors persist or different errors appear,
note down the code and contact Technical
Support.
buttons to modify or
buttons).
USE - 29