ViewSonic PJ1172 User Manual page 31

INPUT Menu(Continued)
Item
P.IN P. INPUT
P.IN P. POSIT.
POWERUP
INPUT
INFORMATION
S2-ASPECT
RESET
Select a signal input port for the child window using the
VIDEO  S-VIDEO
About the child window, please refer to the section "Displaying the
memo
Child Window".
Select the display position of the child window using the
buttons.:
About the child window, please refer to the section "Displaying the
memo
Child Window".
Select a signal input port to display just when the projector is turned
on, using the
/
LAST INPUT  M1-D  RGB  BNC  COMPONENT  S-
VIDEO  VIDEO
Selecting LAST INPUT selects the port that was used at the last time.
Pressing the (or the ENTER) button displays the INPUT
INFORMATION menu.
The INPUT INFORMATION menu shows the information about the
current signal input as illustrated below.
The "FRAME LOCK" message means the frame lock function is
memo
working. This function automatically works when a RGB signal with
vertical frequency of 50 to 60 is input, and it displays a moving picture
more smoothly.
The "SACRT RGB" message means the COMPONENT port is
memo
working as a SCART RGB port. Please refer to the item
"COMPONENT" in this table.
Select TURN ON or TURN OFF using the
TURN ON  TURN OFF
When TURN ON is selected, an S2-video signal can be identified and
the optimum aspect ratio is automatically selected.
This item is performs only at a S-VIDEO signal.
memo
When the ASPECT button is used or the item "ASPECT" of the
memo
MAIN menu is operated, TURN OFF will be automatically selected to
this item.
Select EXECUTE using the
EXECUTE  CANCEL
The items of the INPUT menu are collectively returned to the initial
setting. Note that the item "INFORMATION" is not reset.
Description
buttons.:
button to reset the INPUT menu items.:
/ buttons.:
/
/ buttons.:
ViewSonic PJ1172 26