Displaying The Child Window
This feature called "PinP (Picture in Picture)" is available only when a RGB signal is
memo
selected to main screen.
Press the PinP button.
1
The child window with a picture of a video signal will
appear.
Press the PinP button again to change the size of the child
2
window or close the window.
Small child window
No child window
You can select the video signal to display in the child
memo
window, and the position of the child window. Please refer
to the items "P.INP. INPUT" and "P.INP. POSIT." of the table
of the section "INPUT Menu".
Selecting An Audio Input
This feature is available only when the child window is on the screen.
memo
When the child window is on the screen,
1
press the VOLUME button.
As illustrated on the right, a dialog will appear
on the screen.
Use the cursor buttons
2
input.
RGB (Audio input for the main screen)
Video (Audio input for the child window)
You also can adjust the volume using the cursor
memo
buttons
/ . Please refer to the section "Adjusting The
Volume".
Press the VOLUME button again to close the dialog and
3
complete this operation.
Even if you don't do anything, the dialog will
memo
automatically disappear after a few seconds.
Large child window
/
to select an audio
PinP button
Cursor
buttons
VOLUME
button
ViewSonic PJ1172
19