Rear View Connections (Alternate Version) - Sceptre E325BD-MQC User Manual

Rear View Connections (alternate version)

HEADPHONE – This connection is for headphones to be attached to
1.
the Display.
2. SPDIF - This connection port is used for sending out digital audio
signals to digital surround sound receivers. The orange (Coaxial
SPDIF OUT) connector sends out either bit-stream or PCM digital
sound signal to a home theater receiver with digital optical input.
YPbPr / AV – This connection port is for DVD players or satellite /
3.
cable set-top boxes that use component cables. From left to right,
connect green, blue, and red for video, and then connect white for
left channel audio, and red for right channel audio. For AV, connect
the yellow cable to the green port then use red and white for audio.
HDMI – HDMI connects to devices that use HDMI cable, such as
4.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video. HDMI 2 also doubles as the MHL connection for
cell phones. MHL is a protocol where the Display will display what
your cell phone displays. If your cell phone supports MHL you can
purchase a MHL cable from any electronic store and connect it to
HDMI 2 and also your cell phone. Make sure the Display's source is
changed to HDMI 2 and turn on your cell phone. You should see an
image of your cell phone screen. HDMI 2 also supports ROKU™
streaming stick. Plug the ROKU stick to HDMI 2, and switch your
source to HDMI2. Afterwards use the purple colored buttons to
access ROKU functions.
- 15 -
www.SCEPTRE.com
SCEPTRE E325 HD Display User Manual