Install The Display Unit (Ilx-F509/Ilx-F511) - Alpine iLX-507 Owner's Manual

-60 mm
Sheet Rear
(2×50 mm)
3
Attach the Cover Rear to the rear of the
display unit using 2 screws (M2.6×6).
Secure the screws, then attach the Sheet caps.
Cover Rear (Included)
Install the display unit (iLX-F509/
iLX-F511)
1
Fix the Display unit to the slider of the main
unit using 4 screws (M5×8).
Screws (M5×8) (Included)
Sheet caps
(Included)
Screws
(M2.6× 6)
(Included)
CAUTION
Do not adjust the display angle when the display
unit is not fixed to the slider of the main unit using
4 screws (M5×8). Doing so may not turn power on.
2
Mount the Power Plate.
• If the Power Plate is not mounted, the display unit
may not be turned power on. Make sure to mount
it.
3
Mount the Cover Hinge using 2 screws
(M3×4).
Secure the screws, then attach the Sheet
Hinge.
Screws (M3×4)
(Included)
Power Plate (Included)
Sheet Hinges
(Included)
Cover Hinge
(Included)
81
-EN