Install The Display Unit - Alpine iLX-F903D Installation Manual

Install the display unit

1
Remove the 2 angle adjustment screws (M4×6) fixing the
left and right sides of the Display unit and pull the top of
the display forward.
Display unit
Angle adjustment screws (M4×6) (left and right)
• Vertical positioning screws may need to be removed earlier (See Step 4)
in order to manipulate the screen enough to install the POWER PLATE.
6
-EN
2
Fix the Display unit to the slider of the main unit using 4
screws (M4×6).
3
Mount the POWER PLATE using a screw (M3×4).
POWER PLATE (Included)
• If you do not attach the POWER PLATE, the display will not turn on.
Make sure to attach the POWER PLATE.
Screw (M4×6) (Included)
Screw (M3×4) (Included)