Tuning Channels By Category; Checking The Siriusxm Radio Id Number; Storing Channel Presets; Tuning Channels Using Presets - Alpine iLX-507 Owner's Manual

Tuning Channels by Category

Channels are grouped into categories based on the type of
content heard on the channels.
1
Touch [CATEGORIES] on the SiriusXM main
screen to activate the category browsing
mode.
The Categories screen appears.
Super Categories
Up to 16 types of super categories can be displayed. To
switch the super category, swipe the super categories
section left or right.
Categories
Up to 48 categories can be displayed in one super
category. To switch the category, swipe the categories
section left or right.
2
Touch the target super category, then the
target category.
The Categories Channel List screen appears.
• Up to 383 channels can be displayed in one category.
To switch the channel, swipe the screen left or right.
3
Select the desired channel.
Checking the SiriusXM Radio ID
Number
To subscribe to the SiriusXM Satellite Radio service, it is
necessary to locate and identify the Radio ID of your
SiriusXM Tuner. You can check the Radio ID on the bottom
surface of the SiriusXM Tuner box. You can also check it
from this unit by performing the following procedure.
1
While receiving SiriusXM Radio, touch [
or [CH ] to select channel "0".
The unit displays the Radio ID number.
2
To cancel the Radio ID number display,
change the channel to a channel other than
"0".
50
-EN
• The SiriusXM Radio ID does not contain the letters I, O, S, or
F.
• System Information on the Profiles/Setting screen can also be
used to view the Radio ID number. See "Displaying the System
Information" (page 53).

Storing Channel Presets

You can store 36 of your favorite SiriusXM channels for easy
recall with Preset buttons.
1
Touch and hold the Preset number you want
to store for at least 2 seconds to store the
channel.
2
Repeat the procedure to store up to 11 other
channels.
12 presets can be stored in each of the 3 SXM bands for
a total of 36 presets.
• If you store a new channel into a preset which already has a
channel assigned, the current channel will be cleared and
replaced with the new one.

Tuning Channels using Presets

Touch any one of the Preset numbers you have
already stored in the Preset mode screen.
The preset channel is received.
CH]