Table of Contents
Advertisement
VLAN Isolation Feature
The 802.3at PoE+ Switch has one feature called VLAN function. When switching
the mode to the "VLAN" position, port 1 to port 8/16/24 wouldn't able to
communicate with each other.
Standard
> VLAN
Extend
Switch Mode
Menu (5 sec)
Up
Options:
Standard
>
VLAN
Enter
Extend
Back
Down
PWR
2.3.2 Budget Control
Due to the power allocation strategy of PSE, when the residual power of PoE is
too large, the power distribution of the port can be increased as much as possible
by increasing the power trimming of the PSE, so that the utilization of the PSE
power supply can be improved. There are four levels of budget control named
Unchanged (default), Add 5% PB, Add 10% PB and Add 15% PB.
1. The default PoE budget is 120W/300W in unchanged mode. If
you hope to have a full load of over 120W/300W, please select
Add 5% PB, Add 10% PB and Add 15% PB.
2. In order to make sure the PSE power supply is not overloaded for a long
Note
time, please try to ensure that TP is less than PB.
VLAN 1: P1 P17 P18
VLAN 2: P2 P17 P18
VLAN 16: P16 P17 P18
2
GSW-1820VHP
2
4
6
8
10
12
14
16
PoE
SFP
LNK
1
3
5
7
9
11
13
15
17
18
ACT
PoE
1000
LNK
ACT
PoE In-Use
1
10/100
LNK
ACT
4
6
8
10
12
14
16
3
5
7
9
11
13
15
16-Port 10/100/1000T
802.3at PoE
+
2-Port Gigabit SFP Ethernet Switch
SFP
17
18
23
Advertisement
Table of Contents
