Superior Fireplaces VRT4032ZEP Manual page 19

3. Place left ember bed log as shown in
Figure 30. The log has groove on one
side that sets on the ember bed pan. The
back side of this log needs to rest against
the front of the base assembly. Make sure
the fl ame from the ember pan does not
touch the ember bed log.
Figure 30 - Installing Left Ember Bed Log
4. The VRT4032 and VRT4036 use two dif-
ferent right ember bed logs. The VRT4032
right ember bed log is installed in the same
manner as the log in step 3 above but on
the right side. The VRT4036 right ember
bed log has a hole in the bottom that sets
on the grate fi nger and the other end rest
on the fi replace fl oor, place log as shown
in Figure 31. The back side of this log
needs to rest against the front of the base
assembly, make sure the fl ame from the
ember pan does not touch the ember bed
log.
VRT4036 Right
Ember Bed Log
Hole
Underneath
Grate Prong
Figure 31 - Installing Right Ember Bed Log
5. The left middle log has a groove on the
bottom to sit on the chassis and has to sit
on the tab on the back of the left front log
as shown in Figure 32.
6. The right middle log has a groove on the
bottom to sit on the chassis and has to sit
on the tab on the back of the right front. The
right middle log should have a recess area
that fi ts around the ramp log as shown in
Figure 33.
900719-00C
INSTALLATION
Continued
Left Ember
Bed Log
SuperiorFireplaces.us.com
Figure 32 - Installing Left Middle Log
Right Middle
Log
Figure 33 - Installing Right Middle Log
7. The rear middle log should fi t between the
ramp log and the rear burner. The left and
right middle logs have recessed areas for
the rear middle log to sit into (See Figure
34, Page 20). Be careful not to push the
rear burner out of position while installing
this log.
8. Rest rear log in back corner sections of
chassis assembly as shown in Figure 35,
Page 20.
Left Middle
Log
19