Exposure Compensation - Panasonic Lumix DC-BS1H Operating Instructions Manual

Exposure Compensation

You can compensate the exposure when the correct exposure determined by the camera is too bright or too dark.
You can adjust the exposure in 1/3 EV steps in a range of ±3 EV.
1
Press [Fn2].
●
At default setting, [Exposure Comp.] is assigned to [Fn2].
● About Fn buttons (
●
You can also set it from the menu screen.
[MENU/SET] [
2
Compensate the exposure.
●
Rotate .
3
Confirm your selection.
●
Press [MENU/SET].
● If you set the ISO sensitivity to [AUTO] when [Exposure Mode] is set to [M], you can compensate the exposure.
● The set exposure compensation value is stored even if you turn off the camera.
● The standard value for correct exposure can be adjusted:
[ ] [ ] [Exposure Offset Adjust.] (
5. Recording settings - Metering / Exposure / ISO Sensitivity
159 / Fn Buttons)
] [ ] Select [Exposure Comp.]
193 / [Exposure Offset Adjust.])
- 84 - - 84 -