Genlock Settings; Input A Sync Signal - Panasonic Lumix DC-BS1H Operating Instructions Manual

Genlock settings

When using several units of this camera or recording in combination with other recording devices, input the external sync signal
from the [GENLOCK IN] terminal to synchronize the cameras.
The camera is compatible with BBS (Black Burst Sync) and tri-level sync.

Input a sync signal

A
B
A Camera (Slave)
[GENLOCK IN] terminal
B
BNC cable (commercially available)
C
Sync signal generator (Master)
D
External device (Slave)
E
1
Connect the sync signal generator and camera with a BNC cable.
2
Set [Genlock Input] to [ON].
●
[MENU/SET] [
3
Output a sync signal with the sync signal generator.
●
A [ ] is displayed on the left side of the screen when the camera and external synchronization signal input from the
[GENLOCK IN] terminal is synchronized.
● It is recommended to use a double shielded BNC cable equivalent to 5C-FB.
4. Recording Videos - Genlock settings
C
] [ ] [Genlock] [Genlock Input]
D
[ON]
- 66 - - 66 -
E