[Focus Transition]
Smoothly transitions the focus position from the current position to a position registered in advance.
1
Select [Focus Transition].
●
[MENU/SET]
[
2
Set the recording settings.
[Start]
[Focus Pull Setting]
[Focus Transition Speed]
[Focus Transition Rec]
[Focus Transition Wait]
3
Close the menu.
●
Selects [Start], and press [MENU/SET].
●
The recording screen is displayed.
●
To return to the setting screen, press [Fn1].
6. Special Video Recording - [Focus Transition]
]
[
]
[Focus Transition]
Start recording.
Registers the focus position.
●
The setting screen for the focus position is displayed when you select either
[1], [2], or [3]. Use the same procedure as MF (
check the focus, then press [MENU/SET] to register the focus position.
Sets the moving speed of focus.
Moving speed: [SH] (fast) to [SL] (slow)
●
Starts Focus Transition when recording starts.
●
Select the position registered with [Focus Pull Setting].
Sets the wait time before the start of Focus Transition.
- 114 -
- 114 -
79
/
Record Using
MF) to