Message Displays - Panasonic Lumix DC-BS1H Operating Instructions Manual

Message Displays

Meanings of main messages and response methods.
Card
[Memory Card Error] / [Format this card?]
● It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before
formatting. ( 27 / Formatting Cards
[Memory Card Error] / [This memory card cannot be used]
● Use a card compatible with the camera. (
[Insert memory card again.] / [Try another card]
● Unable to access the card. Reinsert the card.
● Insert a different card.
[Read Error] / [Write Error] / [Please check the card]
● Failure to read or write data. Turn off the camera, reinsert the card, and then turn it on again.
● The card may be broken.
Insert a different card.
●
[Recording was cancelled due to the limitation of the writing speed of the card]
● Insufficient card write speed. Use a card of a supported Speed Class. (
● If the recording stops even when you are using a card that meets the specified Speed Class rating, the data writing speed of
the card is getting slow. We recommend backing up data, and formatting. (
Lens
[The lens is not attached properly. Do not push lens release button while lens is attached.]
● Remove the lens once, and then attach it again without pressing the lens release button. (
Turn on the camera again, and if it is still displaying, contact the dealer.
[Lens attachment failed. Please make sure the lens is attached correctly.]
● Remove the lens from the camera body and gently wipe the contacts on the lens and the camera body using a dry cotton
swab. Attach the lens, turn on the camera again, and if it is still displaying, contact the dealer.
14. Materials - Message Displays
(Initialization))
10 / Memory Cards That Can Be
- 265 - - 265 -
Used)
10 / Memory Cards That Can Be
27 / Formatting Cards (Initialization))
20 / Attaching a
Used)
Lens)