Output Control Information To The External Recorder; Output Audio Via Sdi; Set The Gain Of The Audio Signal That Is Output Via Sdi - Panasonic Lumix DC-BS1H Operating Instructions Manual

[System Frequency]: [24.00Hz (CINEMA)]
[SDI Output Resolution]
● This memorizes the setting value for each recording frame rate of [Rec Quality].
● When [System Frequency] is set to [24.00Hz (CINEMA)], it is fixed to [1080PsF].
● When set to a recording quality for high frame rate video, the frame rate is down-converted for output.

Output control information to the external recorder

Outputs record starting and stopping control information to the external recorder connected with SDI.
[MENU/SET] [ ] [ ]
Settings: [ON] / [OFF]
● It can be set when [SDI Time Code Output] is [ON].
● Control information is output when pressing the video rec. button, even if the video cannot be recorded (such as when
there is no card inserted into the camera).
● Only compatible external devices can be controlled.

Output audio via SDI

Outputs audio to external devices connected via SDI.
[MENU/SET] [ ] [ ]
Settings: [ON] / [OFF]
● High resolution audio cannot be output when output via SDI. When [Sound Output (SDI)] is set to [ON], [96kHz/24bit] of
[XLR Mic Adaptor Setting] cannot be used.

Set the gain of the audio signal that is output via SDI

Sets the audio signal's gain that is output to the SDI connected external device.
[MENU/SET] [ ] [ ]
Settings: [0dB] / [-6dB] / [-8dB]
7. Output image - SDI output settings
1080p
1080i
1080PsF
720p
[SDI Rec Output] Select [SDI Recording Control]
[SDI Rec Output] Select [Sound Output (SDI)]
[SDI Rec Output] Select [SDI Sound Output Gain Adj.]
Recording frame rate of the [Rec Quality]
- 143 - - 143 -
48.00p
24.00p
—
—
1080/24.00PsF
—