Installation - Heath Zenith Secure Home SH-4192-BK-A Manual

Mode Switching Summary
TEST
AUTO
MANUAL MODE
* If you get confused while switching modes,
turn the power off for 1
back on. After the calibration time the con-
trol will be in the AUTO mode.
D B
®
ual rite
Light comes on half bright for selected time af-
ter dusk (Off, 3 hr., 6 hr., until dawn). Selecting
OFF disables this feature. The motion sensing
features will continue to work as described
in this manual. If motion is sensed, the light
turns on full bright for the ON-TIME (1, 5, or
10 minutes) then returns to dim mode.

INSTALLATION

Estimated Installation Time: 30 minutes
Items needed for installation (not included):
• Phillips and flathead screwdrivers
• Pliers
• Safety glasses • Light bulb
• Silicone caulk
For best performance, mount the fixture about
6 feet (1.8 m) above the ground.
WARNING: Turn power off at circuit
breaker or fuse.
ON-TIME Switch at 1,
5, or 10 minutes
Flip light switch
off for one second
then back on*
/ minutes, then
1
2
Dimmer Control
• Wire strippers/cutters
1. Remove two nuts.
SENS
MIN MAX
4. Set sensitivity control on back
5. Attach X-Bar to
junction box
Due to the size and weight of the fixture, you
may find it helpful to have an assistant hold the
fixture in place while connecting the wires.
2
2. Remove X-bar.
3. Tighten screws
finger tight.
of fixture to mid-position.
Junction
200477-02
Box