[Initialize All]; [Off] - Panasonic PT-VW360D Operating Instructions Manual

1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]
[TIMER]
[FILTER COUNTER
RESET]
Setting [TIMER]
If you want to regularly replace the air filter, set its cycle time. When the air filter usage time reaches the set time,
a message of "FILTER COUNTER has reached the set time" prompting you to replace the air filter is displayed on
the projection screen.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
3) Press as to select [TIMER].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[1000 H] ~ [7000 H]

[OFF]

Setting [FILTER COUNTER RESET]
Resets the usage time of the air filter.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
3) Press as to select [FILTER COUNTER RESET].
4) Press the <ENTER> button.
5) When the confirmation screen is displayed, press qw to select [OK] and then press the <ENTER>
button.
f The display of [FILTER COUNTER] changes to "0H".

[INITIALIZE ALL]

Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE ALL].
2) Press the <ENTER> button.
f The [INITIALIZE ALL] screen is displayed.
3) When the confirmation is displayed, press qw to select [OK] and then press the <ENTER> button.
f The [NOW INITIALIZING...] screen is displayed and then the [POWER OFF.] screen will be displayed.
4) Press the <ENTER> button.
f The operation of other buttons is disabled.
f The initial setting (display language) screen will be displayed when turning on the projector next time.
Note
f The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
f When [INITIALIZE ALL] is executed, [STANDBY MODE], [EMULATE], [FILTER COUNTER] and the setting values of [NETWORK/USB]
cannot be returned to the factory default values. For details about the initialization of [NETWORK/USB], please refer to [NETWORK/USB] →
[INITIALIZE] (x page 85).
78 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Displays the usage time of the filter.
Sets the replacement cycle of the air filter.
Resets the air filter usage time.
Select to display the message. You can set the replacement cycle of the air filter in increments of 1000
hours..
Select not to display the message.