Serial In> Terminal - Panasonic PT-VW360D Operating Instructions Manual

<SERIAL IN> terminal
The <SERIAL IN> terminal of the projector conforms to RS-232C so that the projector can be connected to and
controlled from a computer.
Connection
Pin assignments and signal names
D-Sub 9-pin (female)
Outside view
Communication conditions
The communication conditions differ depending on the setting of [PROJECTOR SETUP] menu → [EMULATE].
When [EMULATE] is set to [DEFAULT], the communication conditions are as follows.
Signal level
Sync. method
Baud rate
Parity
Character length
Stop bit
X parameter
S parameter
122 - ENGLISH
Chapter 7 Appendix - Technical Information
Connecting terminals on projector
D-Sub 9-pin (female)
D-Sub 9-pin (male)
Pin No.
RS-232C-compliant
Asynchronous
9 600 bps
None
8 bits
1 bit
None
None
Computer
Communication cable (straight)
Signal name
— NC
TXD Transmitted data
RXD Received data
— NC
GND Earth
— NC
CTS
Connected internally
RTS
— NC
Contents