Table of Contents
Advertisement
f The items will switch each time you press the button.
[200 H] → [300 H] → [OFF] → [100 H] → [200 H] → ...
Setting [FILTER COUNTER RESET]
Resets the usage time of the air filter.
1)
Press as to select [FILTER COUNTER].
2)
Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
3)
Press as to select [FILTER COUNTER RESET].
4)
Press the <ENTER> button.
5)
When the confirmation screen is displayed, press as to select [OK] and then press the <ENTER>
button.
f The display of [FILTER COUNTER] changes to "0H".
[INITIALIZE ALL]
Return various setting values to their factory default settings.
1)
Press as to select [INITIALIZE ALL].
2)
Press the <ENTER> button.
f The [INITIALIZE ALL] screen is displayed.
3)
When the confirmation is displayed, press as to select [OK] and then press the <ENTER> button.
f The [NOW INITIALIZING...] screen is displayed and then the [POWER OFF.] screen will be displayed.
4)
Press the <ENTER> button.
f The operation of other buttons is disabled.
f The initial setting (display language) screen will be displayed when turning on the projector next time.
Note
f The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
f When [INITIALIZE ALL] is executed, [STANDBY MODE], [EMULATE], [FILTER COUNTER] and the setting values of [NETWORK] cannot be
returned to the factory default values. For details about the initialization of [NETWORK], please refer to [NETWORK] menu → [INITIALIZE]
( x page 87).
78 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Advertisement
Table of Contents
