Connecting Example : Computers - Panasonic PT-VW360D Operating Instructions Manual

Connecting example : Computers

Control computer
USB memory
Optional wireless module
(Model No.: ET-WML100)
Control computer
*1 The wireless module (Model No.: ET-WML100) and the wireless LAN function are not available in Taiwan.
Attention
f When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially
available shielded cables.
Note
f For the HDMI cable, use an HDMI High Speed cable that conforms to the HDMI standards. If a cable that does not conform to the HDMI
standards is used, images may be interrupted or may not be projected.
f The <HDMI 1 IN> terminal / <HDMI 2 IN> terminal can be connected to an external device with the DVI-D terminal by using an HDMI/DVI
conversion cable. However, this may not function properly for some external devices, and image may not be projected.
f If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate
the projector.
f To output audio, properly set the [PROJECTOR SETUP] menu → [AUDIO SETTING] → [AUDIO IN SELECT].
f Attach the optional wireless module (Model No.: ET - WML100) or USB memory directly to the <USB A (VIEWER/WIRELESS)> terminal of
this projector without using a USB extension cable or USB hub.
f When the <VARIABLE AUDIO OUT> terminal is connected with cable, the sound will not be output from the built-in speaker.
Chapter 2 Getting Started - Connecting
Computer
*1
Computer Computer
Audio equipment
ENGLISH - 33