Download Print this page

KTI Networks KS-1080 Specification Sheet

Managed 8-port 10/100 fast ethernet switch with poe function and fiber connectivity

Advertisement

Quick Links

KS-1080
Product Highlights :
4 PoE PSE 10/100M ports
2 typical 10/100M ports
2 100FX port slots
SNMP/Web/Telnet management
Port-based, 802.1Q VLAN
Port, 802.1p, DSCP, IP
network based QoS
Ordering Information :
Model
Fiber Mode
KS-1080-xxx
KS-1080-FMT
ST MMF
KS-1080-FMC
SC MMF
KS-1080-FJM
MT-RJ MMF
KS-1080-FSA2
SC SMF
KS-1080-FSL2
SC SMF
FCC Part 15
Class A
'
CISPR 22 Class A
Katron Technologies Inc.
15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,
Hsi-chih, Taipei Hsien, Taiwan.
Te l : 886-2-2698-3878
Fax : 886-2-2698-3873
E-mail : kti@ktinet.com.tw
URL : http : //www.ktinet.com.tw
KTI Networks Inc.
7400 Harwin Dr., Suite 120 Houston,
Texas 77036 U.S.A.
Te l : 713-266-3891
Fax : 713-914-0555
E-mail : kti@ktinet.com
URL : http : //www.ktinet.com
Trademarks : All brand names are trademarks or registered
trademarks of their respective holders.
This information is subject to change without prior notice.
Managed 8-Port 10/100 Fast Ethernet Switch
with PoE Function and Fiber Connectivity
Key Features :
6 10/100M ports support auto-negotiation and auto-MDI/MDI-X configuration
4 10/100M ports provide PoE PSE functions
2 100FX fiber port slots support optional fiber modules
Fiber modules support single mode fiber and multimode fiber connections
Provides wire speed store-and-forward switching
Supports IEEE 802.3x flow control for full-duplex operation and back-pressure for half-duplex
Provides port-based, 802.1Q tag-based VLAN function
Provides port-based, 802.1p, DSCP-based, and IP address QoS function
Provides port configuration and PoE control
SNMP, telnet, Web management support
Specifications :
Standard
Max.
Distance
Network Ports
2km
2km
2km
Network Cables
20km
20km
PoE Function
VLAN function
QoS function
Management
MAC Addresses
LEDs
Environment
Dimension
Power
Fiber Optical Specification of Fiber Modules :
Model
KS-1080-FMT
KS-1080-FMC
KS-1080-FJM
KS-1080-FSA2
KS-1080-FSL2
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, 100Base-FX, IEEE 802.3af
6 10/100Mbps auto-negotiation, auto-MDI/MDI-X ports
2 100Mbps 100Base-FX port slots
10Base-T :
Cat. 3, 4, 5 or higher up to 100m
100Base-TX : Cat. 5 or higher up to 100m
100Base-FX : MMF 50/125µm 60/125µm, SMF 9/125µm
IEEE 802.3af compliance
PSE (power source) on Port 1 - Port 4
48VDC, 15.4W max. per port
Port-based, IEEE 802.1Q Tag-based
Port-based, 802.1p-based, DSCP-based, network address-based
SNMP MIB-II and private MIB, telnet, web, event traps
Table with 1K entries
Per unit :
Power
Per 10/100M port :
Link/Activity, 100M, Duplex/Collision status
Per fiber port slot :
Link/Activity status
Operating Temperature : 0
Relative Humidity : 5% ~ 95% non-condensing
295 x 160 x 43 mm
(19" Rack mountable)
100-240VAC, 50-60Hz, 87 watts max.(includes PoE full power supply)
FX & Cable Wavelength
ST MMF
1310nm
SC MMF
1310nm
MT-RJ MMF
1310nm
SC SMF
1310nm
SC SMF
1310nm
O
C ~ 40
O
C, Storage temperature: -20
Tx Power
Rx Sensitivity Max. Rx Power
-19 ~ -14dBm
-31dBm
-19 ~ -14dBm
-31dBm
-19 ~ -14dBm
-31dBm
-15 ~ -8dBm
-31dBm
-15~-7dBm
-32dBm
O
C ~ 85
O
C
-14dBm
-14dBm
-14dBm
-7dBm
-3dBm
080110

Advertisement

loading