Spin Speed; Rinse Hold; Display - AEG LAVAMAT L 1045 E Instruction Booklet

132996650.qxd 26/09/01

SPIN SPEED

Press this button to reduce the maximum speed of the final
speed proposed by the machine for the selected programme
or to select option
The maximum spin speed for cotton is 1000 rpm, for syn-
thetics and wool 900 rpm and for delicates 700 rpm.

RINSE HOLD

By selecting this option, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished,
the pilot light
to indicate that the water must be emptied out.
To empty out water:
• press the START/PAUSE button: after emptying, the machine performs
the spin cycle required for the type of wash selected;
• select the spin speed and press START/PAUSE;
• select the DRAIN programme "C" to empty out the water without
spinning.
Warning! The programme selector dial must be turned first to RESET O
and then to the DRAIN programme "C".
If the water is not emptied out, the machine automatically empties
itself after 18 hours.

Display

The display shows the following information:
• Duration of the selected programme (in minutes), calculated auto-
matically on the basis of the maximum recommended load for each type
of fabric.
• When the programme has finished, a steadily lit zero is displayed.
• Delayed start, (19 hours max.) programmed using the special button
. The countdown is updated every hour.
• Alarm code indicating a fault in the machine operation (see page 31).
14.30 Pagina 13
(RINSE HOLD).
(END) on the programme progress display illuminates
(Nero/Process Black pellicola)
Description of the appliance
13