Switching On The Appliance/Selecting A Programme; Changing Spin Speed /Selecting The Night Cycle - AEG LAVAMAT 75805 User Information

Switching on the appliance/selecting a programme

Set the programme and tempera-
ture using the programme knob.
3
By selecting a programme, you
switch the appliance on at the
same time.
– The programme progress display
indicates the programme steps
that the selected programme will
perform.
– In the multi-display the
estimated length of the programme (in minutes) appears.

Changing Spin Speed /Selecting the NIGHT CYCLE

The washing machine suggests the
maximum permitted speed that is
suitable for the selected pro-
gramme. You can reduce this speed:
Press the Spin/ù (NIGHT CYCLE)
button repeatedly until the desired
display lights up.
3
The speed for the final spin can still be altered during the programme.
To do this:
1. Press the START/PAUSE button.
2. Change the speed.
3. Press the START/PAUSE button again.
NIGHT CYCLE
With ù (NIGHT CYCLE) the water is just drained at the end of the cycle.
There is no spinning during the whole washing cycle. Because of this
the programme runs very quietly. ù (NIGHT CYCLE) is therefore partic-
ularly suitable if you want to wash at night.
14