Select The Required Programme; Select The Temperature; Select The Spin Speed, Rinse Hold Or Night Cycle Option - AEG LAVAMAT 84950 Instruction Booklet

Select the required programme (1)

You can choose the right programme for any type of laundry following the
descriptions on the washing programme tables (see Washing Programmes).
Turn the programme selector dial to the required programme. The programme
selector determines the type of washing cycle (e.g. water level, drum movement,
number of rinses) and the washing temperature according to the type of laundry.
The pilot light of the button 8 starts to flash and the Display shows the
programme name and the duration of the selected programme.
The selector dial can be turned either clockwise or anticlockwise.
Position to Reset programme/Switching OFF of the machine.
O
At the end of the programme the selector dial must be turned to position
O, to switch the machine off.
Attention!
f you turn the programme selector dial to another programme when the machine
I
is working, the Yellow pilot light of the button 8 will flash 3 times and the
message «Please turn programme selector in the last used position» will
appear in the display. The machine will not perform the new selected programme.
Select the temperature (button 2)
Press this button repeatedly to increase or decrease the temperature, if you want
your laundry to be washed at a temperature different from the one proposed by
the washing machine.
The maximum temperatures for each washing programme can be checked in the
paragraph «Washing programmes».
The symbol of cold wash corresponds to
Select the spin speed, Night cycle
(button 3)
Press this button repeatedly to change the spin speed, if you want your laundry to
be spun at a speed different from the one proposed by the washing machine.
For the maximum spin speed forseen for each programme consult the chapter
«Washing programmes».
«Rinse Hold»
emptied out to prevent the fabrics from creasing. At the end of the programme,
and -symbol will flash on the display, the messages «Door locked» and «Rinse
hold» appear on the display, the pilot light of the button 8 goes off and the door is
blocked to indicate that the water must be emptied out.
: by selecting this option the water of the last rinse is not
.
or Rinse hold
Use 17
option
0