Presentation Modes - Furuno FAR-2807 Operator's Manual

5. VIDEO PLOTTER OPERATION
Sample video plotter display
Tracked Target
(TT)
AIS activated
target
Dangerous side of
own ship safe
contour may look
like this (hatched line)
5.3

Presentation Modes

Five presentation modes are available: North-up, Course-up, Head-up, STAB
head up, Stern-up and North-up TM (True Motion). To select a mode, use the
[MODE] key or select the PRESENTATION MODE box then push the left button.
For a description of the presentation modes, see section 1.12.
Note 1: Chart data is not displayed on the HEAD UP and STAB HEAD UP
modes.
Note 2: The screen may flash when the heading is changed more than one
degree in the HEAD UP or STAB HEAD UP mode.
Automatic resetting of own ship mark in true motion mode
In the true motion mode, the own ship mark is automatically returned sternward
75% from the screen center when it reaches a location 50% of the display
radius.
5-2
Past position
(AIS and TT)
Video plotter display
Separation zone
Waypoint
W012
Navline
Own ship
safe contour
Planned route
Heading line
Own ship
vector
Approximate
coastline