Setting Up Nav Lines - Furuno FAR-2807 Operator's Manual

5. VIDEO PLOTTER OPERATION
Erasing all nav lines
1. Left-click the MENU box.
2. Select 5 [PLOTTER].
3. Select 8 [DATA ERASE].
1 BACK
2 OWN TRACK*
RED/GRN/BLU/YEL/
CYA/MAG/WHT/
30%/50%/80%/ALL
3 TARGET TRACK*
RED/GRN/BLU/YEL/
CYA/MAG/WHT/
30%/50%/80%/ALL
4 MARK ALL ERASE
NO/YES
5 WPT ALL ERASE
NO/YES
6 NAV LINE ALL ERASE
NO/YES
7 OWN TRACK DELETE*
2POINTS/AREA
8 TARGET TRACK DELETE*
2POINTS/AREA
4. Select 6 NAV LINE ALL ERASE.
5. Select YES to erase all nav lines and their data.
6. Push the right button three times to close the menu.
5.11.5

Setting up nav lines

Nav lines can be set up as follows:
1. Left-click the MENU box.
2. Select 8 [NAV LINE•WPT].
3. Select 2 NAV LINE DATA.
4. Select INTERNAL DATA.
5. Select 5 NAV LINE WIDTH.
6. Use the scrollwheel to enter the width for the
nav line, from 0.0-9.99(nm). A pair of orange
lines mark the width of the nav line.
5-28
[DATA ERASE]
1
2
3
3
DATA ERASE menu
* Not available on IMO type
1
* Colors not shown on IMO type
2
* Not available on IMO type
3
* Not available on IMO or A type
1 BACK
2 NAV LINE DATA
3 NAV LINE SELECT
4 SKIP NEXT WPT
5 NAV LINE WIDTH
6 [WPT SET]
7 [WPT LIST]
8 [NAV LINE SET]
9 [NAV LINE LIST]
0 NEXT
NAV LINE•WPT menu (1/2)
[NAV LINE•WPT (1/2)]
OFF/EXT DATA/
INTERNAL DATA/
WPT MARK*
- -
FORWARD/REVERSE
0.00NM