Menu Tree - Furuno FAR-2807 Operator's Manual

APPENDIX 1 MENU TREE
MAIN MENU
1 ECHO
2 MARK
3 ALERT
4 TT AIS
5 PLOTTER
6 CARD
7 NAV DATA
8 NAV LINE WPT
9 CUSTOMIZE TEST
1 ECHO
1 BACK
2 2ND ECHO REJ (ON,OFF)
3 TUNE INITIALIZE
4 PM (ON, OFF)
5 SART (ON, OFF)
6 WIPER (OFF, 1, 2)
7 ECHO AREA (CIRCLE, WIDE, ALL)
8 PICTURE SELECT
9 STC RANGE (-10 to +10)
2 MARK
1 BACK
2 OWN SHIP MARK
3 STERN MARK (OFF, ON)
4 PI LINE
5 ANCHOR WATCH
(ON, OFF, 0.00NM)
6 DROP MARK (ON, OFF)
*5
7 INS MARK
8 EBL OFFSET BASE
(STAB GND, STAB HDG, STAB NORTH)
9 EBL, VRM, CURSOR SET
0 RING (ON, OFF)
*1
Not available on IMO or A type.
*2
W type shows PI LINE1. Same choices as "PI LINE".
*3
W type shows PI LINE2. Same choices as "PI LINE".
*4
Appears when 3 PI LINE is set for other than "1".
*5
When INS MARK is OFF, BARGE MARK menu appears.
7 BARGE MARK
*6
IMO and A types show 9 EBL CURSOR BEARING (REL, TRUE)
*7
Not available on IMO type.
1 BACK
2 PICTURE 1 (ON, OFF)
PICTURE 2 (ON, OFF)
PICTURE 3 (ON, OFF)
ICE (ON, OFF)
NEAR (ON, OFF)
*1
FAR (ON, OFF)
NEAR BUOY (ON, OFF)
FAR BUOY (ON, OFF)
ROUGH SEA (ON, OFF)
SHIP (ON, OFF)
HARBOR (ON, OFF)
COAST (ON, OFF)
1 BACK
2 PI LINE BEARING (REL, TRUE)
3 PI LINE (1, 2, 3, 6
4 PI LINE MODE (PARALLEL, PERPENDIC)
5 RESET PI LINE (YES, NO)
6 TRUNC RANGE 1 (OFF, ON, 0.000 - 24.000 NM)
7 TRUNC RANGE 2 (OFF, ON, 0.000 - 24.000 NM)
1 BACK
2 USER CHART (ON, OFF)
3 CURVED EBL (ON, OFF)
4 CHART SYMBOL (ON, OFF)
5 NOTE BOOK (ON, OFF, DISPLAY)
6 ROUTE (OFF, CENT, ALL)
7 PREDICTOR (ON, OFF)
*6
1 BACK
2 EBL1 (REL, TRUE)
3 EBL2 (REL, TRUE)
4 VRM1 (NM, SM, km, kyd)
5 VRM2 (NM, SM, km, kyd)
6 CURSOR BEARING (REL, TRUE)
7 CURSOR RANGE (NM, SM, km, kyd)
8 CURSOR SHAPE
1 BACK
2 BARGE MARK (ON, OFF)
3 BARGE SIZE (LENGTH and WIDTH)
4 ARRANGEMENT
*2*7
*3
)
*4
*1
1 BACK
2 CURSOR (ON, OFF)
3 FRONT HALF LENGTH
4 REAR HALF LENGTH
5 NET WIDTH
6 ROTATE STEP
(360°, 32 POINTS)
AP-1