Chapter 10
10.0 Additional Features
10.1 Turning the Chime ON/OFF
Turning the chime on audibly notifies you whenever an entry/exit sensor is tripped.
To turn the Chime ON or OFF
Press to toggle the Chime ON or OFF for the current partition. An access code
l
may be required to change this setting.
10.2 Audio Verification
Allows the monitoring station to initiate a 2-way audio (talk/listen) or 1-way audio (listen-in only) session when an alarm has been
received. This feature is used to verify the nature of the alarm or determine the type of assistance required by the occupant.
Note: This is a supplementary feature that has not been investigated by UL/ULC.
Note: Must be enabled and configured by installer.
10.3 Visual Verification
Allows the monitoring station to use video clips captured from system motion cameras for verification of any alarms.
Note: This is a supplementary feature that has not been investigated by UL/ULC.
Note: Must be enabled and configured by installer.
10.3.1 System Lockout due to Invalid Attempts
If too many invalid access codes are entered, your system can be configured to automatically lock out inputs from all keypads, wire-
less and proximity keys, and SMS commands for a specified duration. When any keys are pressed, an error tone will sound. FMP
keys are still active during Keypad Lockout.
Note: Feature and lockout duration must be configured by installer.
10.4 Command Outputs
While being useful for many applications, Command outputs are typically configured to operate items such as garage doors or elec-
tric gates. Additionally, Command outputs can be assigned to follow a schedule configured by your installer.
This is a supplementary feature that has not been investigated by UL/ULC.
Must be configured by installer.
To Activate a Command Output
1.
Press [*][7] and if required enter your [access code].
OR
press [*] and use the scroll keys to navigate to Output Control.
2.
Press the number configured to the command output
OR
use the scroll keys to navigate to the desired command output and press [*].
To configure a Command Output to Follow a Schedule
1.
Press [*][7]and use the scroll keys to navigate to Follow Schedule and press [*], fol-
lowed by your access code.
OR
press [*][7][9][User Code].
2.
Press the command output #(1-4) to toggle scheduling and if required enter your
[access code]
OR
use the scroll keys to navigate to the desired command output and press to toggle
scheduling and if required enter your [access code].
10.5 Burglary Verification
The Control Panel includes sequential detection features that require a trip on two or more zones within a given time period, to gen-
erate a confirmed alarm and immediate police response.
Note: Must be enabled and configured by installer.
- 34 -
LCD Display
Door Chime
Feature ON
Door Chime
Feature OFF
LCD Display
Output Control <>
Scroll to View
Output
Activated
LCD Display
Output Control <>
Scroll to View
then
Press (*) to
Follow Schedule
Partition 1 <>
Command O/P 1 Y