Wireless Access Control; Virtual Ac + Thin Ap - TRENDnet TEW734APO User Manual

TRENDnet User's Guide
o Shared Secret: Enter the shared secret used to authorize your router
 Global-Key Update
o Enable this option to set the cache period based on seconds

Wireless access control

The MAC address filter section can be used to filter network access by machines based
on the unique MAC addresses of their network adapter(s). It is most useful to prevent
unauthorized wireless devices from connecting to your network. A MAC address is a
unique ID assigned by the manufacturer of the network adapter.
 Access Control Mode:
o Profile Selection: Select the wireless profile you would like to apply the
access control rule.
o Disable: Access control is disabled
o Allow Listed: Enter MAC address allowed to connect to the access point
o Deny List: Enter MAC addresses to block connection to the access point.
© Copyright 2015 TRENDnet. All Rights Reserved.

Virtual AC + Thin AP

In this mode the access point becomes the virtual access controller and also a thin
access point. Virtual access controller allows you to control all compatible thin access
points connected in your network.
Configuration
1. Log into the management page (see
2. Your access point will prompt you for a user name and password.
3. Enter the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
4. Click the System button on the left side and then System Settings.
5. Select Virtual AC + Thin AP in the Device Mode drop down menu and Select your
Country/Region.
Note: FCC domain products will only support United States Country/Region.
TEW-734APO
"Access the management page" on page 9).
47