Table of Contents
Advertisement
TRENDnet User's Guide
Upgrade Firmware
You may have added many customized settings to your router and in the case that you
need to reset your router to default, all your customized settings would be lost and
would require you to manually reconfigure all of your router settings instead of simply
restoring from a backed up router configuration file.
1. Log into the management page (see
2. Click on Management, and click on Firmware Upload.
3. Click Browse and select the updated firmware file you want to load. Click Upload to
load the firmware file.
Note: Any interruption during the firmware upgrade can damage your device.
Backup and restore your router configuration settings
You may have added many customized settings to your router and in the case that you
need to reset your router to default, all your customized settings would be lost and
would require you to manually reconfigure all of your router settings instead of simply
restoring from a backed up router configuration file.
To back up your configuration:
1. Log into the management page (see
2. Click on Management, and click on Configuration File.
3. Depending on your web browser settings, you may be prompted to save a file (specify
the location) or the file may be downloaded automatically to the web browser settings
default download folder. (Default Filename: config.bin)
4. Save the configuration file to location on your computer.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management
page" on page 9).
"Access the management
page" on page 9).
To restore your router configuration and upgrade firmware
1. Log into the management page (see
2. Click on Management, and click on Configuration File.
3. Under Load Settings from file, click on Browse select your saved configuration file
and click Upload.
Reboot your access point
You may want to restart your router if you are encountering difficulties with your router
and have attempted all other troubleshooting.
There are two methods that can be used to restart your router.
Disconnect the power adapter – Located on the rear panel of your router, see
"Product Hardware Features" on page 4 .
Use this method if you are encountering difficulties with accessing your router
management page. This is also known as a hard reboot or power cycle.
Disconnect the power adapter from the power port of your router for 10
seconds, then, plug the power adapter back into the power of your router.
Wait for your router Status light to begin flashing.
OR
Router Management Page – This is also known as a soft reboot or restart.
Toolbox > Reboot
1. Log into the management page (see
2. Click on Management, and click on Configuration File.
3. Click Yes or OK if prompted to your reboot your device.
TEW-734APO
"Access the management
page" on page 9).
"Access the management
page" on page 9).
31
Advertisement
Table of Contents
